Lightspeed Redcat User Manual page 14

D. ADDING OPTIONAL SECURITY BRACKET
TO POWER SUPPLY BRACKET
• Complete "Install wall bracket" steps on previous page.
• Before sliding the Redcat onto the bracket, slide the security bracket halfway
onto the wall mounting slots.
• Continue with "Attach Redcat and power supply" steps.
• After the Redcat is in place, hold the top of the Redcat and push the security
bracket into the slot until you hear it 'click' in place.
NOTE: If the Redcat needs to be removed, use a small flat blade screwdriver
to pry the security bracket toward the wall and out of the slot on the back of
the Redcat. Lift the Redcat off the power supply bracket.
14