Lightspeed Redcat User Manual page 12

Classroom audio system
Hide thumbs Also See for Redcat:
Table of Contents

Advertisement

B. MOUNTED ON A WALL
First, consider that the Redcat should be placed within 7 feet of an
electrical outlet and about 6-8 feet off the ground.
Next, find a location as far away as possible from the teacher who will
be using the mic.
• The best place is centered on the long wall opposite the teacher.
• If this is not possible, other good locations are on the wall next to
the teacher.
• Avoid placing the Redcat on any wall close to where the teacher
usually stands to instruct the class. Having the teacher's mic too
close to the Redcat can result in feedback.
USING
THE WALL
TEMPLATE
12
1. Level template and tape to wall
2. Mark position of drill holes on wall
3. Drill pilot holes
4. Insert wall anchors
LEVEL
OR
AVOID!
5. Remove feet from Redcat and place
over anchors
6. Insert and secure screws through the
Redcat feet into the anchors
Push
Level
Tone
Input
Output
GOOD PLACEMENT
BEST PLACEMENT
7. Insert and secure screws through the Redcat
feet into the anchors
8. If using optional security bracket, mount on
wall using the provided screws and anchors
9. Slide the Redcat onto the wall-mounted feet
WALL BRACKETS
SECURITY BRACKET
Optional

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Redcat and is the answer not in the manual?

Questions and answers

Table of Contents