Table of Contents
Advertisement
Enter the 10-digit battery serial number and press OK after the
6.
input.
Figure 5-19 Sample of BMS function (screen 3)
5.6 THROTTLE
Throttle Position Sensor (TPS) Match, this function enables you to
make initial settings to throttle actuators and returns the "learned"
values stored on ECU to the default state. Doing so can accurately
control the actions of regulating throttle (or idle engine) to adjust the
amount of air intake.
The operation guidelines of the Throttle function are shown as
below:
1.
Enter the Throttle menu and choose relevant models according to
the vehicle being tested.
2.
Enter the Auto Recognition menu and turn on the ignition switch.
Read carefully and complete the requisites listed before
3.
performing the throttle regeneration function. And press OK after
completing the instructions shown.
49
Advertisement
Table of Contents
