Epb - Xtool H6EB User Manual

5.2 EPB

Electronic Parking Brake (EPB) System reset is a popular special
function. You can use this function to reset the electronic parking brake
system and brake pads, which also supports the brake pad
replacement (retraction, release of the brake pump), G-sensor, and
body angle calibration. This function has multiple uses and can safely
and effectively
applications include deactivating and activating brake control systems,
assisting in controlling brake fluid, opening and closing brake pads,
setting brakes after replacing brake discs or brake pads, etc.
1. If the brake pad wears the brake pad sense line, the brake pad
sense line will send a signal to the onboard tablet asking for
replacing the brake pad. After replacing the brake pad, you must
reset the brake pad. Otherwise, the car alarms.
2. Reset must be performed in the following cases:
The brake pad and brake pad wear sensor are replaced.

The brake pad indicator lamp is on.

The brake pad sensor circuit is short, which is recovered.

The servo motor is replaced.

The operation guidelines of the EPB function are shown as below:
Enter the EPB menu and choose relevant models according to the
1.
vehicle being tested.
Follow the instructions displayed and press YES after completing
2.
the instructions shown.
maintain the electronic brake
38
system. These