Table of Contents
Advertisement
5.6.
THROTTLE
Throttle Position Sensor (TPS) Match, this function enables you to make initial settings to throttle actuators and
returns the "learned" values stored on ECU to the default state. Doing so can accurately control the actions of
regulating throttle (or idle engine) to adjust the amount of air intake.
The operation guidelines of the Throttle function are shown below:
1.
Enter the Throttle menu and choose relevant models according to the vehicle being tested.
2.
Enter the Auto Recognition menu and turn on the ignition switch.
3.
Read carefully and complete the requisites listed before performing the throttle regeneration function. And
press OK after completing the instructions shown.
4.
Wait until all the parameters are read and displayed.
Press the F2 button and wait until a message of 'Match successfully' pops up.
5.
5.7.
INJECTOR CODING
This function can write the identification code of the fuel injector into the ECU so that the ECU can recognize
and work normally. Write actual injector code or rewrite code in the ECU to the injector code of the
corresponding cylinder for controlling accurately and correcting cylinder injection quantity.
Figure 5-20 Sample of throttle function (screen 1)
Figure 5-21 Sample of throttle function (screen 2)
43
Advertisement
Table of Contents
