Table of Contents
Advertisement
6.
Enter the 10-digit battery serial number and press OK after the input.
5.6 THROTTLE
Throttle Position Sensor (TPS) Match, this function enables you to make
initial settings to throttle actuators and returns the "learned" values stored on
ECU to the default state. Doing so can accurately control the actions of
regulating throttle (or idle engine) to adjust the amount of air intake.
The operation guidelines of the Throttle function are shown as
below:
1.
Enter the Throttle menu and choose relevant models according to the
vehicle being tested.
2.
Enter the Auto Recognition menu and turn on the ignition switch.
3.
Read carefully and complete the requisites listed before performing the
throttle regeneration function. And press OK after completing the
instructions shown.
Figure 5-19 Sample of BMS function (screen 3)
46
Advertisement
Table of Contents
