Torque Switching: Set - AUMA SQVEx 05.2 Manual

SQVEx 05.2
Commissioning (basic settings)
User login
Change settings
10.3.

Torque switching: set

Information
Select main menu
64
SQVEx 14.2/ SQRVEx 05.2
5. Press Ok.
Display indicates the current setting: Limit or Torque
The bottom row of the display indicates either:
- Edit → continue with step 6
- Save → continue with step 10
6. Press Edit.
Display indicates: ▶ Specialist (4)
7. Up ▲ Down ▼ to select user:
Use
Information: Required user level: Specialist (4) or higher
The symbols have the following meaning:
- black triangle: ▶ = current setting
- white triangle: ▷ = selection (not saved yet)
8. Press Ok.
Display indicates: Password 0***
9. Enter password (→ enter password).
The screen indicates the pre-set type of seating (▶Limit or ▶Torque) by means
of a black triangle ▶.
10. Use Up ▲ Down ▼ to select new setting.
The symbols have the following meaning:
- black triangle: ▶ = current setting
- white triangle: ▷ = selection (not saved yet)
11. Confirm selection via
The setting for the type of seating is complete.
12. Back to step 4 (CLOSED or OPEN): Press
Once the set torque is reached, the torque switches will be tripped (overload protection
of the valve).
The torque switches may also trip during manual operation.
Valve damage due to excessive tripping torque limit setting!
The tripping torque must suit the valve.
Only change the setting with the consent of the valve manufacturer.
Customer settings M0041
Torque switching M0013
Trip torque CLOSE M0088
Trip torque OPEN M0089
Default value: According to order data
Setting range: Torque range according to actuator name plate
1. Set selector switch to position 0 (OFF).
2. Press push button C Setup and hold it down for approx. 3 seconds.
Display goes to main menu and indicates: ▶ Display
SQRVEx 14.2 Control unit: electronic (MWG)
Save.
Esc.
ACVExC 01.2 Modbus RTU