AUMA SQVEx 05.2 Manual page 30

SQVEx 05.2
Electrical connection
30
SQVEx 14.2/ SQRVEx 05.2
Connection with support terminals for line topology
When using solid cables (single or multiple strands), additional support terminals
must be used.The support terminals (terminal blocks) are mounted above the terminal
carrier.
Figure 26: Terminal assignment of support terminals: Channel 1 (1A/1B)
[XK] Terminal assignment according to wiring diagram (customer connection):
□ Terminals 31 and 32 if another fieldbus device follows
Terminals 31 34 if the actuator is the last fieldbus device
■
Figure 27: Terminal assignment of support terminals: Channel 2 (2A/2B)
[XK] Terminal assignment according to wiring diagram (customer connection):
▣ Terminals 35 and 36 if another fieldbus device follows
Terminals 35 38 if the actuator is the last fieldbus device
■
SQRVEx 14.2 Control unit: electronic (MWG)
ACVExC 01.2 Modbus RTU