Wiring Diagram - Directed DIRECTECHS DB3 Installation Manual

Wiring diagram

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram (
D2D Port
(+) Ignition Input/ Output
(-) Hood Switch (-) Hood Switch
(AC) Tach Input
(-) Ground
(+) Parking Light Output
(+) 12V Input
7 403.CHRYSLER 7.34 2010 Jeep Liberty
©2022 VOXX•DEI LLC. All rights reserved.
(+) Ignition: Pink or Pink/Striped, pin 3
(MUX) Ignition:
Violet/Brown, pin 1
1
CAN C High:
White/Black or White/Green, pin 6
If the vehicle security light
remains ON after performing a
remote start takeover or the
radio turns ON when
performing functions like lock
and unlock, then disconnect
the Violet/Brown &
Violet/Green MUX connection.
Refer to the
"Vehicle connections" section
for wire and connector details.
CAN C Low: White/Lt.Blue, pin 7
Sentry Key Module
(black 8-pin conn.,
8
connector side view)
HS CAN High: Tan/Black: 3
(AC) Tach Output: Violet/White: 5
(MUX) Ignition Output: Violet/Green: 8
(MUX) Ignition Output: Violet/Brown: 9
(-) RAP Off Output: Yellow/Black: 10
HS CAN Low: Tan: 4
).
XKD2D65