Directed DB3 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. Directechs DB3
  6. Installation manual

Directed DB3 Installation Manual

Smart key for 2022 dodge/ram charger
Hide thumbs Also See for DB3:
Table of Contents

Advertisement

Quick Links

Download this manual
403.CHRYSLER22
DB3
v1.09
2022 Dodge/Ram Charger (Smart Key)
THCHD3-REV3+ Compatible
(Sold Separately)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DB3 and is the answer not in the manual?

Questions and answers

Related Manuals for Directed DB3

Summary of Contents for Directed DB3

  • Page 1 403.CHRYSLER22 v1.09 2022 Dodge/Ram Charger (Smart Key) THCHD3-REV3+ Compatible (Sold Separately)

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Installation Wiring diagram with T-Harness (THCHD3 Rev.3+) Wiring diagram Locating components in the vehicle Vehicle connections Module programming For Convenience-Only programming, see next section. Module programming for convenience only (skip transponder) Connecting the module LED diagnostics and troubleshooting Soft reset...

  • Page 3: Introduction

    Introduction DB3 is an all-in-one door lock and override module. Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key)

  • Page 4: Vehicle Function Compatibilities

    Brake Status (foot brake) Control of aftermarket alarm with OEM remote Door Locks Status Key2GO E-Brake Status Immobilizer Bypass-Data No Key Req'd Ignition Status Accessory Activation Ignition Activation 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    [1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin or if not supported in data. [2] Tach: An optional connection required on some remote starters, which do not support a tach signal in D2D. 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 6: Installation

    (+) 12V Input Headlight Switch (-) Ground (black connector) Do not connect (MUX) D2D Port (black-gray conn. Parking Lights: passenger kick panel) White/Brown, pin 3 (+) 12V: Violet/Red, pin 3 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 7: Wiring Diagram

    (black conn. at Start-Stop button) (black-gray conn. above passenger kick panel) Immobilizer Data: White/Lt. Green, pin 5 (MUX) Parking Lights: White/Brown, pin 3 (+) 12V: Violet/Red, pin 3 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 8: Locating Components In The Vehicle

    Locating components in the vehicle 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 9: Vehicle Connections

    Headlight Switch, black 6 pin plug, pin 3 White/Brown H2/10 Yellow/Black No Connection No Connection H2/11 Orange/Black No Connection No Connection H2/12 Blue/Red (-) W2W Only - Hood Output Remote Starter 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.
  • Page 10 BCM above passenger kick, black 48 pin plug (E), pin 27 Pink/White Tachometer [2] Camshaft Position Sensor, engine driver side rear, black 4 pin plug, Dk. Blue/Tan (3.6L) pin 1 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 11: Module Programming

    When the configuration is completed, reconnect the module. The LED will turn ON solid green for 3 seconds, then turn OFF. You have successfully completed the module programming sequence. 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 12: Module Programming For Convenience Only (Skip Transponder)

    Within 5 seconds, press the Push-to-Start (PTS) button twice (2) to turn the ignition ON, then the LED shuts OFF. Press once (1) more on the PTS button to turn the ignition OFF. You have successfully completed the module programming sequence. 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 13: Connecting The Module

    (12-pin) (D2D) (10-pin) (14-pin) W2W installation If required: Connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin harness to the module. (12-pin) (10-pin) (14-pin) 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 14: Led Diagnostics And Troubleshooting

    External Module Synchronization Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.
  • Page 15 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 16: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 17: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 18: Feature And Option List

    If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 19: Limited One Year Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

  • Page 20: Quick Reference Guide (Customer Copy)

    With Get In and Go, you simply remote start the vehicle, unlock the doors, get in and go... All that's left to do is put the gear in drive and drive off. 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.
  • Page 21 Notes 403.CHRYSLER22 1.09 2022 Dodge/Ram Charger (Smart Key) ©2023 Directed. All rights reserved.

Table of Contents