Contents Introduction Vehicle function compatibilities Pre-installation and application warnings OEM remote starter detection Wiring diagram Locating components in the vehicle Vehicle connections Connecting the module Module programming LED diagnostics and troubleshooting Soft reset Hard reset Feature programming Feature and option list Limited one year consumer warranty Quick reference guide...
The following safety warnings must be observed at all times: • Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. • When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never operate the system in an area that does not have adequate ventilation.
Introduction DB3 is an all-in-one door lock and override module. Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. Vehicle function compatibilities This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.
Keyless and Smart Key will remain functional during remote start on hybrid vehicles. If the vehicle is already equipped with an OEM remote starter, the installer must disconnect it before installing the DB3 module, otherwise it will not program.(For more information see "OEM remote starter detection") Refer to "Vehicle connections"...
If the vehicle is equipped with an Add-On Lexus/Toyota OEM remote starter: The factory remote starter must be permanently disconnected before programming the Directed interface as both modules cannot coexist. See "Physical OEM remote start fuse location". If the vehicle is equipped with a BCM Enabled Lexus/Toyota OEM remote starter: The vehicle does not have a physical ...
This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.
Refer to your authorized installation center for more • Aftermarket remote. specific information. • Directed SmartStart application via your smartphone. Button(s) Actions If applicable, you can also start the engine remotely by pressing the Lock button 3 Press & hold for 1 second to lock.
Need help?
Do you have a question about the DB3 and is the answer not in the manual?
Questions and answers