Directed DIRECTECHS DB3 Installation Manual
2010 jeep liberty. 403.chrysler 7.34
Hide thumbs
Also See for DIRECTECHS DB3:
- Installation manual (25 pages) ,
- Manual (6 pages) ,
- Installation manual (21 pages)
Table of Contents
Advertisement
Quick Links
INSTALLATION GUIDE
DB3
2010 Jeep Liberty. 403.CHRYSLER 7.34
Designed by Installers for Installers
© 2022 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.
Advertisement
Table of Contents
Related Manuals for Directed DIRECTECHS DB3
Summary of Contents for Directed DIRECTECHS DB3
- Page 1 2010 Jeep Liberty. 403.CHRYSLER 7.34 Designed by Installers for Installers © 2022 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...
-
Page 2: Table Of Contents
Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Installation Wiring diagram with T-Harness CHTHD2 (R1-R7 & R9-R10) or THCHD2 (R1) Wiring diagram Locating components in the vehicle Vehicle connections Module programming Key-type Vehicles Push-to-Start (PTS) Vehicles Connecting the module LED diagnostics and troubleshooting Soft reset Hard reset... -
Page 3: Introduction
Introduction DB3 is an all-in-one door lock and override module. Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.CHRYSLER 7.34 2010 Jeep Liberty ©2022 VOXX•DEI LLC. -
Page 4: Vehicle Function Compatibilities
Vehicle function compatibilities This section lists all the functions compatible with this vehicle for the installation illustrated in this guide. Parking Lights Control Remote Start Takeover Arm Factory Security SmartStart Disarm Factory Security Tach / RPM Output Door Lock Control Entry Monitoring ALL Door Pins Door Unlock Entry Monitoring Hood Pin... -
Page 5: Pre-Installation And Application Warnings
Pre-installation and application warnings Firmware notes: This section highlights important information for this specific firmware and will assist in pricing accordingly, as well as bringing awareness to any operational or vehicle limitations. T-Harness Keys required for Keys required for CHTHD2/THCHD2 compatible programming operation... -
Page 6: Installation
Wiring diagram with T-Harness CHTHD2 (R1-R6 & R9-R10) or THCHD2 (R1 & R11) Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( only Optional connection for THCHD2 (R11) If the vehicles security light remains ON after performing a remote start takeover or the radio turns ON when performing functions like lock and unlock, then CUT and... -
Page 7: Wiring Diagram
Wiring diagram Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( (+) Ignition: Pink or Pink/Striped, pin 3 XKD2D65 (MUX) Ignition: CAN C Low: White/Lt.Blue, pin 7 Violet/Brown, pin 1 Sentry Key Module (black 8-pin conn.,... -
Page 8: Locating Components In The Vehicle
Locating components in the vehicle 403.CHRYSLER 7.34 2010 Jeep Liberty ©2022 VOXX•DEI LLC. All rights reserved. -
Page 9: Vehicle Connections
Vehicle connections The connection information listed below is specific to the 2010 Jeep Liberty. Refer to “Pre-installation and application warnings” for a list of important notes. Data 14-pin blue connector (H1) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color H1/1 Light Green... - Page 10 Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color H3/1 Green (-) W2W Only - Lock Input Remote Starter H3/2 Blue (-) W2W Only - Unlock Input Remote Starter H3/3 Red/White (-) W2W Only - Trunk Input Remote Starter H3/4 White/Violet (-) W2W Only - Aux1 Input...
-
Page 11: Module Programming
Module programming Refer to “LED diagnostics and troubleshooting” for more information and for troubleshooting purposes. Key-type Vehicles Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift is in the neutral position. -
Page 12: Push-To-Start (Pts) Vehicles
Push-to-Start (PTS) Vehicles Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift is in the neutral position. The harnesses must be connected in this exact order: ... -
Page 13: Connecting The Module
Connecting the module Important! Make all the required connections to the vehicle, as described in this guide, and double check to ensure everything is correct prior to moving onto programming. Warning! To take advantage of advanced features, you must use DirectLink 4.5 (and higher) or the Directechs Mobile application. Flashing a module using your computer: 1. -
Page 14: Led Diagnostics And Troubleshooting
LED diagnostics and troubleshooting This section provides LED diagnostics and troubleshooting information to guide you through the various stages of your installation. Module Programming Description Troubleshooting Make sure the D2D harness is connected and that 12 Volt is present between the red and black wires. If Module has no power. - Page 15 Active Ground When Running (Status) Description Troubleshooting Ground When Running (Status) command The module has initialized the remote start sequence. received. Flashes green Ignition ON command received. The module has received the Ignition ON command and is processing the remote start sequence. Flashes red &...
-
Page 16: Soft Reset
Soft reset A module reset will only erase the steps perfomed in “Module programming”. The firmware and settings flashed to the module will not be affected. D2D installation Connect the 10-pin, 12-pin & 14-pin harnesses to the module. Press and hold the programming button, then connect the 4-pin D2D harness. -
Page 17: Feature Programming
Feature programming To enter feature programming routine: 1. Turn the ignition ON, then OFF. 2. Within 5 seconds, press and hold the programming button until the LED turns ON orange (after 3 seconds). 3. Release the Programming button. 4. The LED will flash green once slowly to indicate the feature number is 1. After a short delay, the LED flashes red rapidly to indicate the current option of feature 1 (e.g. -
Page 18: Feature And Option List
Feature and option list It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the information on this page. -
Page 19: Limited One Year Consumer Warranty
Limited 12 Months Consumer Warranty VOXX DEI LLC (the Company) warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product, (at the Company’s option) without charge for parts or repair labor. -
Page 20: Quick Reference Guide
Aftermarket remote. Send the Unlock command on the factory or Press Unlock on • Directed SmartStart application via your smartphone. either remote* aftermarket remote.* If applicable, you can also start the engine remotely by pressing the Lock button 3 Complete the following steps within 45 seconds or the vehicle will shut down. - Page 21 * Press & hold for 5 seconds to activate the trunk release (optional). * Icon and remote appearance may differ depending on the model purchased. SmartStart compatible This system is compatible with Directed SmartStart. For a complete list of supported features, please visit www.mysmartstart.com. What is SmartStart? Now you can remote start, lock and unlock your car just by pushing a button on your smartphone;...