Directed DB3 Installation Manual

Directed DB3 Installation Manual

2016 buick verano smart key. 403.gm9 2.38
Hide thumbs Also See for DB3:

Advertisement

Quick Links

INSTALLATION GUIDE
DB3
2016 Buick Verano (Smart Key). 403.GM9 2.38
Designed by Installers for Installers
© 2021 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.

Advertisement

Table of Contents
loading

Summary of Contents for Directed DB3

  • Page 1 2016 Buick Verano (Smart Key). 403.GM9 2.38 Designed by Installers for Installers © 2021 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...
  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Wiring diagram Locating components in the vehicle Keyport location Vehicle connections Key2GO Connecting the module Module programming LED diagnostics and troubleshooting Soft reset Hard reset Feature programming Feature and option list Limited one year consumer warranty Quick reference guide...
  • Page 3 The following safety warnings must be observed at all times: • Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. • When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never operate the system in an area that does not have adequate ventilation.
  • Page 4: Introduction

    Introduction DB3 is an all-in-one door lock and override module. Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to <ConnectImportant> for more information. Vehicle function compatibilities This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.
  • Page 5: Pre-Installation And Application Warnings

    Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D. Hook up brake for automatic transmission vehicles or clutch for manual transmission vehicles. 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 6: Wiring Diagram

    (+) Ignition Status Output: Gray/Black: 7 (MUX) Brake Activation Output: Violet/Brown: 9 Immo. Data (conn. side): Yellow/Black: 10 (MUX) Clutch: pin B Clutch Switch (black 3-pin connector) 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 7: Locating Components In The Vehicle

    Locating components in the vehicle 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 8: Keyport Location

    A or B pocket. Chevrolet Malibu Hybrid (Smart 2016 - 2019 Open the center console and place the transmitter in the transmitter A or B Key) pocket. 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 9 Place the transmitter in the front cupholder. GMC Yukon (Smart Key) 2015 - 2020 Open the center console and place the transmitter in the transmitter pocket. Front Cupholder Center Console 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 10: Vehicle Connections

    No Connection H2/12 Blue/Red (-) W2W Only - Hood Output Remote Starter Input 10-pin black connector (H3) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 11 BCM on pass side of cntr dash, white 26 green/gray pin plug, pin 22 Tachometer top front of engine, black 12 pin plug, pins 1, 2, 3, or brown, blue, green, or lt. blue 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 12: Key2Go

    Any first-time user must re-register to gain access to Key2GO, and some additional information will be required to complete the registration process, such as your Directed account number and store name. Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application.
  • Page 13: Module Programming

    Once the configuration is completed, reconnect the module. The LED turns ON solid green for 3 seconds, then turns OFF. You have successfully completed the module programming sequence. 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 14: Led Diagnostics And Troubleshooting

    Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 15 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 16: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 17: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 18: Feature And Option List

    Smart OEM Alarm Control will monitor the alarm and door lock status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.
  • Page 19: Limited One Year Consumer Warranty

    This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.
  • Page 20: Quick Reference Guide

    Factory remote. Press the Remote Start button on the transmitter.* • Aftermarket remote. • Directed SmartStart application via your smartphone. & The parking lights will flash once to indicate the Parking lights flash x1 Press Remote vehicle is now in Pit Stop Mode.
  • Page 21 Notes 403.GM9 2.38 2016 Buick Verano (Smart Key) © 2021-01-25 Directed. All rights reserved.

This manual is also suitable for:

Directechs db3

Table of Contents