Directed Directechs DB3 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. Directechs DB3
  6. Installation manual
Directed Directechs DB3 Installation Manual

Directed Directechs DB3 Installation Manual

Hide thumbs Also See for Directechs DB3:
Table of Contents

Advertisement

Quick Links

Download this manual
Functions compatible with the 2018 Toyota RAV4 Hybrid (Smart Key)
*Telematics features: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart Pro.
* Odometer
Arm Factory Security
Brake Status (foot brake)
Control of aftermarket alarm with OEM remote
Disarm Factory Security
Door Lock Control
Door Locks Status
Door Unlock
Driver Priority Unlock
E-Brake Status
Entry Monitoring ALL Door Pins
Entry Monitoring Driver Door Pin
Entry Monitoring Hood Pin
Entry Monitoring Trunk/Hatch Pin
Factory Alarm Trigger Monitoring
Fuel level/EV battery level
Ignition Status
Immobilizer Bypass-Data No Key Req'd
Remote Start Ready
SmartStart
Tach / RPM Output
Trunk / Hatch Release
403.TL6
2018 Toyota RAV4 Hybrid (Smart Key)
v2.26

Advertisement

Table of Contents
loading

Related Manuals for Directed Directechs DB3

Summary of Contents for Directed Directechs DB3

  • Page 1 403.TL6 v2.26 2018 Toyota RAV4 Hybrid (Smart Key) Functions compatible with the 2018 Toyota RAV4 Hybrid (Smart Key) *Telematics features: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart Pro. * Odometer Entry Monitoring Driver Door Pin Arm Factory Security Entry Monitoring Hood Pin Brake Status (foot brake)

  • Page 2: Table Of Contents

    Contents Introduction Pre-installation and application warnings OEM remote starter information Wiring diagram Locating components in the vehicle Vehicle connections Module programming IMPORTANT!Before programming your module, you must first check if your vehicle is equipped with an OEM remote starter and disable it. If the vehicle is equipped with an OEM remote starter, whether Active or Inactive, itMUSTbe temporarily disabled or permanently disconnected depending on the vehicle Please refer to the "OEM remote starter information"...

  • Page 3: Introduction

    This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 4: Pre-Installation And Application Warnings

    [3] Pit Stop/Idle mode: This connection is only required for Pit Stop/Idle mode in manual transmission vehicles. [4] Autolights: This connection is only required if vehicle is equipped with autolights.. 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 5: Oem Remote Starter Information

    Depending on your vehicle, a telematics interrupt may be required. A status output must be assigned and an external relay must be used. Refer to Directwire on www.directechs.com for vehicle-specific telematics interrupt wire color and location. 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 6: Wiring Diagram

    Certification ECU (white 18-pin connector behind glove box) (-) Parking Light: BODY ECU White, pin 30 BTX: Blue, pin 25 BRX: Red, pin 26 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 7: Locating Components In The Vehicle

    Locating components in the vehicle 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 8: Vehicle Connections

    (Data) Immo Data 2 Body ECU on back of dash fuse box, white 30 pin plug, pin 26 Data Red (BRX) H2/12 Blue/Red (-) Lock Output No Connection 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 9: If Equipped With An Oem Starter, But Will Prevent The Aftermarket Remote Start From Functioning Properly

    Body ECU on back of dash fuse box, white 30 pin plug, pin 30 White Starter Certification ECU behind glove box, white 18 pin plug, pin 7 Lt. Blue Tachometer [2] (program engine checking off) 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 10: Module Programming

    3 seconds to indicate the programming is completed. Otherwise, proceed to the next step. Press the PTS button once more to turn the ignition OFF. You have successfully completed the module programming sequence. 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 11: Connecting The Module

    (D2D) (10-pin) (14-pin) W2W installation If required: Connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin harness to the module. (12-pin) (10-pin) (14-pin) 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 12: Led Diagnostics And Troubleshooting

    Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 13 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 14: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the LED starts & to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Solid Release 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 15: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 16: Feature And Option List

    Unlocks only the driver door when the button is first pressed, and unlocks all doors when it is pressed a second 1. Driver priority* Unlock Driver Priority time within 5 seconds. 2. All Unlocks all doors when the button is first pressed. 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 17: Limited One Year Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key) ©2023 Directed. All rights reserved.

  • Page 18: Quick Reference Guide

    Refer to your authorized installation center for more • Aftermarket remote. specific information. • Directed SmartStart application via your smartphone. Button(s) Actions If applicable, you can also start the engine remotely by pressing the Lock button 3 Press & hold for 1 second to lock.

Table of Contents