Table of Contents
Advertisement
Firmware Updates
If the need arises, you can replace the IPL EXP firmware. This section covers the following
firmware‑related topics:
•
•
Determining the Firmware Version
There are several ways to check which firmware version the control processor is using:
•
•
Before using either method, connect the expansion interface and the PC to the same
network. For details see the
on page 7, the
page 36, and the IPL EXP PDU4H Setup Guide.
Using Toolbelt Software
1.
2.
3.
Using a Browser
The IPL EXP comes with a factory default embedded web page.
1.
2.
3.
Determining the Firmware Version
Updating the Firmware
View the device information in Toolbelt.
View the general status information section of the IPL EXP embedded web page.
Hardware Features and Installation
Software-Based Configuration and Control
Open the Toolbelt software.
Either add the desired expansion interface manually or start device discovery and select
the desired IPL EXP from the list of discovered devices.
Manage
Click
in the row for the desired IPL EXP and view the device information that
appears in that section.
Start a browser program.
Enter the IP address of the IPL EXP into the address field of the browser and log on to
the internal web page.
Look for the version within one of the information panes.
section starting
section starting on
IPL EXP PDU4H • Firmware Updates
46
Advertisement
Table of Contents
