Table of Contents
Advertisement
852-1322
Configuration in the WBM
Figure 34: WBM "Diagnostics" Page – "SNMP Setting Part 3" Tab
10.5.1.1 SNMP Agent
To enable SNMP agent on the managed switch, please check the SNMP Enabled box
and click [Submit] button as shown in Figure "SNMP Agent Setting". The SNMP version
1 (V1), version 2c (V2c) and version 3 are supported by WAGO's managed switches as
summarized in "WBM Page, "Diagnostics" – "SNMP" Tab, SNMP Agent Setting"Fehler!
Verweisquelle konnte nicht gefunden werden.. Basically, SNMP V1 and SNMP V2c have
simple community string based authentication protocol for their security mechanism, while
SNMP V3 is improved with cryptographic security. The default setting of SNMP Version is
V3. The user can select SNMP Version by checking either the V1/V2c box and/or the V3
box.
Product manual | Version: 1.2.0
49
Industrial Managed Switch
Advertisement
Chapters
Table of Contents
