Table of Contents
Advertisement
Configuration in the WBM
Navigation Links and WBM Pages
[Diagnostics]
•
SNMP
•
Modbus
•
System-Log
•
Port Monitor
[Security]
•
Static SAK
•
Secure Code
•
802.1X (IEEE 802.1X)
•
Port Security
•
VLAN
[Redundancy]
•
RSTP
[Maintenance]
•
Firmware-Upgrade
•
Reset to Default
•
Backup/Restore
•
Reboot
•
Logout
The settings/configuration of the industrial managed switch can be made on these WBM
pages.
The default values are displayed in bold.
10.2 Login Failure
If you failed to login, you will encounter an Error dialog as shown in Figure "Login Failure
Dialog". You will have two options or buttons to choose from which are [Forget it] or [Try
again] buttons. If you click the [Try again] button, you will be re-directed to the Login
page with some waiting time, which is determined by the number of times that the user
failed to login. The first and the second tries will have 0 second waiting time. The third try
will have a waiting time of 10 seconds. The fourth try will have a waiting time of 100 sec-
onds. The fifth up to tenth tries will have a waiting time of 1000 seconds. If the user tried
more than ten times, the user will only be able to click the [Forget it] button to log in with
the a secure code generated by the security card as shown in Figure "Example of Secu-
rity Card".
Note
Functions of the "Secure code" tab
The use of the security card and the [Forget it] option is enabled by default on the de-
vice. You can disable this feature in the "Security" – "Secure code" tab page, after logging
in for the first time.
32
Product manual | Version: 1.2.0
Industrial Managed Switch
®
TCP
852-1322
Advertisement
Chapters
Table of Contents
