852-1322
The description of each parameter and its default value in Password tab page are sum-
marized in Table "WBM "Configuration" Page – "Password" Tab".
Parameters
User Name
Password
Confirmed Password wago
10.5 Diagnostics
10.5.1 SNMP
The SNMP („Simple Network Management Protocol") is used in network management
systems to monitor the state of attached devices that require the attention of an adminis-
trator. SNMP is a component of the "internet protocol suite" defined by the IETF ("Internet
Engineering Task Force"). It consists of a set of standards for network management, in-
cluding an application layer protocol, a database schema and a set of data objects.
SNMP provides management data in the form of variables on the managed systems,
which describe the system configuration. These variables can be queried (and sometimes
changed) by managing applications.
An "SNMP community string" is a text string that acts as a password. It is used to authen-
ticate messages that are sent between the management station (the SNMP manager)
and the device (the SNMP agent). The string is included in every packet transmitted be-
tween the SNMP manager and the SNMP agent.
Product manual | Version: 1.2.0
Industrial Managed Switch
Factory Default
Description
admin
User name to log-in with maximum length of 15 characters.
wago
Password to log-in with maximum length of 15 characters.
Re-type the password. This has to be exactly the same as the
password entered in the above field with maximum length of
15 characters.
Configuration in the WBM
Figure 31: WBM "Configuration" Page – "Password" Tab
Table 22: WBM "Configuration" Page – "Password" Tab
45