Table 24 Wbm "Diagnostics" Page - "Snmp" Tab, Snmp V1/V2C Community Setting - WAGO 852-1322 Manual

852-1322
Table "WBM "Diagnostics" Page – "SNMP" Tab, SNMP V1/V2c Community Setting
"briefly provides descriptions of SNMP V1/V2c community string setting.
Parameters
(Community) String
Permission Type
10.5.1.3 SNMP Trap
The industrial managed switch provides a trap function that allows the switch to send no-
tification to agents with SNMP traps or inform. The notifications are based on the status
changes of the switch such as link up, link down, warm start, and cold start. For inform
mode, after sending SNMP inform requests, the switch will resends inform request if it
does not receive response within 10 seconds. The switch will try re-send three times. Fig-
ure "WBM "Diagnostics" Page – "SNMP" Tab, SNMP Trap" shows the SNMP Trap sec-
tion.
Product manual | Version: 1.2.0
Industrial Managed Switch
Table 24: WBM "Diagnostics" Page – "SNMP" Tab, SNMP V1/V2c Community Setting
Factory Default Description
Public (read-all-only) Define name of strings for authentication. The maximum length of
the string is 15 characters.
Private (read-write-
all)
- Choose a type from the dropdown list: read-all-only and read-
write-all. See notes below for a briefed explanation.
• Choose a type from the dropdown list: read-all-only and read-
write-all. See notes below for a briefed explanation
• Read write-all: permission to read/write OID 1 Sub Tree.
Configuration in the WBM
Figure 36: SNMP V1/V2c Community Setting
51