Control Board (Sctrl) Led Indicators; Figure 52: Management Board (Smbe) Front Panel; Table 23: Management Board Indicators - Mellanox Technologies Vantage 8500 Installation Manual

Table 23 - Management Board Indicators
Indication
Hot Swap
(Blue)
Power (Green)
Info (Green)
SM Active
(Green)
CM Active
(Green)

7.5.3 Control Board (sCTRL) LED Indicators

The following types of LED indicators are located on the Vantage 8500 control board (one board
per chassis):

Figure 52: Management Board (sMBE) Front Panel

Indicates when the board can be extracted:
ON – indicates that the board can be extracted
OFF – indicates that the board cannot be extracted
ON – indicates that all board voltage levels are operating normally
OFF – indicates a problem in board's power supply
General purpose LED for management use; can be turned on and off per manager com-
mand (useful when trying to physically locate a specific Vantage 8500 switch).
Indicates the Subnet Manager status on a specific sMBE:
Blinking – indicates standby mode.
OFF – indicates that SM off (not in Standby or Active).
Subnet Manager is related to the multi-path master function (topology-related feature).
Indicates that the Chassis Management is running on the specific sMBE.
Description
Mellanox Technologies
Rev A04
79