Sony DNW-A100 Maintenance Manual page 89

(Continued)
No. Item
3-8-22 FAST VCO tracking adjustment
Gain
Offset
3-8-23 PB video phase adjustment
3-8-22 TBC Y/C delay rough adjustment
METAL
3-8-25 Impact error offset adjustment
Y
C
3-8-26 TBC Y/C delay adjustment
METAL
OXIDE
3-8-27 VISC phase adjustment
Data save
*4: RV400 is not equipped on the TBC-24 board of board number suffixes 14 and higher.
*5: RV402 is not equipped on the TBC-24 board of board number suffixes 14 and higher for PAL.
*6: If the specification is not satisfied by adjusting RV300 on TBC-24 board, change the data of A37 :
TBC VR : SQ Y RZ.
*7: If the specification is not satisfied by adjusting RV500 on TBC-24 board, change the data of A37 :
TBC VR : SQ C RZ.
*8: RV504 is not equipped on the TBC-24 board of board number suffixes 11, 12, and 13.
*9: If the specification is not satisfied by adjusting RV200 on TBC-23 board, change the data of A37 :
TBC VR : VISC PHASE.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Adjustment point
*4
1RV400/TBC-24
*5
1RV402/TBC-24
1RV300/TBC-24
A37 : TBC VR : SQ Y RZ *6
1RV502/TBC-24
1RV503/TBC-24
1RV500/TBC-24
*7
A37 : TBC VR : SQ C RZ
1RV504/TBC-24 *8
1RV401/TBC-24
1RV601/TBC-24
1RV500/TBC-24
1RV504/TBC-24 *8
1RV501/TBC-24
1RV200/TBC-23
*9
A37 : TBC VR : VISC PHASE
A3F : NV-RAM CONTROL
3-8. Analog Betacam PB System Alignment
Remarks
RV400/TBC-24
Video monitor
VIDEO OUTPUT COMPONENT Y
VIDEO OUTPUT COMPONENT
Video monitor
Video monitor
VIDEO OUTPUT COMPONENT
VIDEO OUTPUT COMPONENT
VIDEO OUTPUT COMPONENT Y
3-8-1. Adjustment Overview
3-53