Sony DNW-A100 Maintenance Manual page 415

For DNW-A100P/A50P/A45P
Component video signal generator
Composite video signal generator
Component waveform monitor
Composite waveform/vector monitor
Oscilloscope
Spectrum analyzer
Network analyzer
Audio signal generator
Audio analyzer
Audio level meter
Frequency counter
Digital voltmeter
VISC phase adjustment tool
Extension boards
Extension harness
Composite video monitor
Terminator
Cleaning tape
Alignment tapes
Recording tape
n
When using the DNW-A100P/A50P/A45P in 525/60 mode, the Drum Phase adjustment procedure differs
from that in 625/50 mode. And the composite video monitor for 525/60 system is required at the time.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
http://getMANUAL.com
TEKTRONIX TSG-300 or equivalent
TEKTRONIX TSG-271 or equivalent
TEKTRONIX 1411 or equivalent
TEKTRONIX WFM300 or equivalent
TEKTRONIX 1751 or 1781R or equivalent
TEKTRONIX 2465B or equivalent
ADVANTEST R3261A or equivalent
ANRITSU MS420B or equivalent
TEKTRONIX SG505-option 02 or equivalent
TEKTRONIX AA501A-option 02 or equivalent
HEWLETT-PACKARD HP3400A or equivalent
ADVANTEST TR5821AK or equivalent
ADVANTEST TR6845 or equivalent
(SONY part No. J-6332-240-A)
EX-377 (SONY part No. J-6269-810-A)
EX-556 (SONY part No. A-8277-212-A)
14P (SONY part No. 1-952-684-11)
For 625/50 (PAL) system
(Note
For 525/60 (NTSC) system
75 Z, BNC
BCT-5CLN (SONY standard product)
CR5-1B PS (SONY part No. 8-960-096-91)
CR5-2A PS (SONY part No. 8-960-098-44)
CR8-1A PS (SONY part No. 8-960-098-45)
CR8-1B PS (SONY part No. 8-960-096-86)
SR2-1 (SONY part No. 8-960-075-11)
SR2-1P (SONY part No. 8-960-075-61)
SR5-1P (SONY part No. 8-960-075-51)
Betacam SX Tape (SONY standard product)
6-1. General Information for Electrical Alignment
6-3