Sony DNW-A100 Maintenance Manual page 303

(5) Move the T drawer arm manually in the
vertical direction. At that time, confirm that
the vertical play satisfies specification 2.
If specification 2 is not satisfied, perform the
following adjustment. (Vertical play
adjustment)
1 Remove the stop washer.
2 Adjust the polywasher value at the
bottom of the T drawer base.
3 Fix the T drawer arm using a new stop
washer and confirm that specification 2 is
satisfied.
(6) Confirm that the height of the T drawer arm
satisfies the specification 3 with the T drawer
arm turned to clockwise by finger.
If specification 3 is not satisfied, perform the
steps (3) and later again.
n
Some of the T drawer assemblies have no
arm stopper. In these cases, the confirmation
described above, step 6, is not required.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
. T drawer arm height adjustment/vertical play adjustment
T drawer arm
A
Spec. 1: (height)
A = 36.3 mm to 36.7 mm
Spec. 2: (vertical play)
0.2 mm or less
. Spec. 1 and 2 are not satisfied.
. Polywasher to adjustment
diameter thickness
0.13 mm
3.0 mm
0.25 mm
0.5 mm
< Side view >
B
T drawer arm
B
Spec.3 : 0.2 mm
(Between arm stopper and arm)
T Drawer Arm Installation
5-18-1. T Drawer Arm Replacement
Part No.
3-701-439-01
3-701-439-11
3-701-439-21
Arm stopper
T drawer assembly
5-119