Sony DNW-A100 Maintenance Manual page 321

7. S Tension Regulator Assembly
Removal
(1) Disconnect the harness from the connector
CN1 on the TC-96 board.
(2) Remove the three screws, then remove the S
tension regulator assembly.
8. Disconnect the Harness
Remove the harness of demagnetization head
assembly from the harness rail, then disconnect
the connector as shown in the figure.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
5-20. Threading Ring and Ring Roller Replacement
Screw (PWH3 x 8)
Screw
(PWH3 x 8)
Screw
(PWH3 x 8)
CN1
S Tension Regulator Assembly Removal
Connector
Harness rail
Demagnetization head assembly
Disconnect the Harness
S tension regulator assembly
TC-96 board
Plate MR
Harness
5-137