5-20. Threading Ring and Ring Roller Replacement
27. Pinch Arm Guard Installation
Screw (PWH3 x 8)
(1) Pass the pinch arm guard through the cassette
post and put the pin into the chassis hole.
Pinch arm guard
(2) Tighten the screw.
Pin
Cassette post
Pinch Arm Guard Installation
28. Flexible Board Mounting
Connect the flexible board to connector CN2 on
AT head assembly
the SE-341 board, then lock.
Harness
29. Harness Connection
Connect the harness to the connector of the AT
Flexible board
head assembly
SE-341 board
CN2
Flexible Board Mounting/Harness Connection
5-147
DNW-A100/A50/A45
DNW-A100P/A50P/A45P