Sony DNW-A100 Maintenance Manual page 237

4. Place the Reel Shift Plate Assembly in
the S Cassette Position
Rotate the drive gear clockwise as far as it will
go.
5. Check the Slantness in the S Cassette
Position
(1) Press the check tool against the reel motor
shaft from the directions indicated by the
arrow.
(2) Check that the clearance between the reel
motor shaft and tool satisfies specification 2.
If the specification is not satisfied, perform
steps 6 and later.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
< S cassette position >
Reel motor shaft slantness
check tool
Cassette reference
plate (L)
Drive gear
Reel motor shaft slantness check tool
Cassette reference plate (L)
Spec.2 : (S cassette position)
Check the Reel Motor Shaft Slantness (S)
5-9-2. Reel Motor Shaft Slantness Adjustment
A
Reel motor shaft
A < 0.1 mm
5-53