Sony DNW-A100 Maintenance Manual page 362

5-28. Reel Shift Motor Replacement
4. Reel Shift Motor Removal
Remove the two screws, then remove the reel
shift motor from the reel shift base.
5. CCM-15 Board Removal
Unsolder and remove the CCM-15 board from the
reel shift motor.
Installation
6. CCM-15 Board Mounting
Pass the terminals of a new motor through the
CCM-15 board, then solder.
n
Solder so that no clearance exists between the
motor and CM-15 board.
5-178
< Bottom view >
Screws (B3 x 4) Reel shift base
Reel Shift Motor Removal
Reel shift motor
Terminal with
negative polarity
Terminal with
positive polarity
CCM-15 Board Removal/Mounting
Reel shift motor
CCM-15 board
_ marking
+ marking
DNW-A100/A50/A45
DNW-A100P/A50P/A45P