Removal
1. T Drawer Assembly Removal
(1) Disconnect the harness from the connector of
the tape top sensor.
(2) Remove the harness from the holder of the
adjustment plate.
(3) Remove the two screws, then remove the T
drawer assembly.
2. T Drawer Arm Removal
(1) Remove the stop washer and polywasher,
then remove the T drawer arm from the T
drawer base.
(2) Remove the spring and polywasher.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
T drawer assembly
Screws
(PWH3 x 8)
T Drawer Assembly Removal
T drawer arm
Polywasher
Spring
Polywasher
Stop washer
T Drawer Arm Removal
5-18-1. T Drawer Arm Replacement
. Harness disconnection
Holder
SE-341 board
T drawer base
5-117