5-30. Power Supply Block Replacement
2. Harnesses Disconnection
(1) Release the two harness clampers as shown in
the figure.
(2) Disconnect the five harnesses.
3. Power Supply Panel Assembly
Removal
Remove the three screws and open the power
supply panel assembly.
n
It is not necessary to disconnect the harness
connected to the power supply panel assembly.
5-186
Harness clamper
Harnesses Disconnection
Power Supply Panel Assembly Removal
Harness clamper
Harnesses
Harnessess
Harness
Screw (PS3 x 6)
Power supply panel assembly
Screws (PS3 x 6)
DNW-A100/A50/A45
DNW-A100P/A50P/A45P