Sony DNW-A100 Maintenance Manual page 372

5-30. Power Supply Block Replacement
7. Harnesses Connection
(1) Connect the each harness to five connectors
shown in the figure.
(2) Hold the harnesses with the harness clampers.
8. Bottom Plate Installation
(1) Install the bottom plate with the six screws.
(2) Put the unit back.
9. Operation Confirmation
Turn the power on and confirm the unit runs in
normal condition.
5-188
Harness clamper
Harnesses Connection
Screws (B4 x 6)
Screws (B4 x 6)
Bottom plate
Screws (B4 x 6)
Bottom Plate Installation
Harness clamper
Harness
Harness
Harness
DNW-A100/A50/A45
DNW-A100P/A50P/A45P