Servo Amplifiers; List Of Specifications - Mitsubishi Electric MELDAS MDS-B-SVJ2 Series Specifications And Instruction Manual

10-1 Servo amplifiers

10-1-1 List of specifications

Servo amplifier type
(MDS-B-)
Voltage, frequency
Tolerable voltage
Power
fluctuation
supply
Tolerable frequency
fluctuation
Method
Dynamic brakes
Regenerative resistor
External digital input
External digital output
External analog output
Protective functions
Structure
Environment conditions
Weight [kg]
Chapter 10 Specifications
SVJ2-01 SVJ2-03 SVJ2-04
3-phase 200 to 230 VAC/ 50, 60 Hz
3-phase 170 to 253 VAC/ 50, 60 Hz
Sine wave PWM control, current control method
External
only
Contactor control output, motor brake control output
Overcurrent cut off, over voltage cut off, overload cut off (electronic thermal relay),
servomotor overheating protection, detector error protection, regeneration error
protection, undervoltage, instantaneous power failure protection, overspeed
protection, excessive error protection
Protective type (Protective model: IP20)
To follow section 3-1-1 Environmental conditions
0.7 0.7
10-2
SVJ2-06 SVJ2-07
Within ±5%
Built-in
Built-in or external option
External emergency stop input
±10V, 2ch
0.7 1.1 1.5
SVJ2-10 SVJ2-20
2.0 2.0