Mitsubishi Electric MELDAS MDS-B-SVJ2 Series Specifications And Instruction Manual page 161

(2) Cell battery ( A6BAT )
Always use the cell battery (A6BAT) in combination with the dedicated case (MDS-BTCASE).
< Specifications >
Battery option type
Lithium battery series
Nominal voltage
Nominal capacity
Hazard class
Battery
Battery shape
safety
Number of
batteries used
Lithium alloy
content
Mercury content
Number of connectable axes
Battery continuous backup time
Battery useful life
(From date of unit manufacture)
Data save time in battery
replacement
Back up time from battery
warning to alarm occurrence
(Note)
Weight
(Note) This time is a guideline, so does not guarantee the back up time. Replace the battery with a new battery as soon as a
battery warning occurs.
< Specifications of the dedicated case MDS-BTCASE >
Type
Number of batteries installed
Number of connectable axes
< Installing the cell battery >
Open the cover of the dedicated
case. Connect the battery connector
and then put the battery inside.
Chapter 6 Dedicated Options
HC□, HC□R, HA□N, HC-SF, HC-RF series:
approx. 20 hours at time of delivery, approx. 10 hours after 5 years
HA-FF, HC-MF series:
approx. 2 hours at time of delivery, approx. 1 hour after 5 years
Up to 8 A6BATs (MR-BATs)（Install either 2, 4, 6 or 8 A6BATs (MR-BATs)）
Max. 8 axes (It varies depending on the number of batteries installed.)
When A6BAT (MR-BAT) x2, 1 to 2 axis/axes
When A6BAT (MR-BAT) x 4, 3 to 4 axes
When A6BAT (MR-BAT) x 6, 5 to 6 axes
When A6BAT (MR-BAT) x 8, 7 to 8 axes
Battery
A6BAT
(MR-BAT)
Dedicated case
MDS- BTCASE
6-9
Cell battery
A6BAT (MR-BAT)
ER17330V
3.6V
1700mAh
-
Single battery
A6BAT (MR-BAT) ×1
0.48g
1g or less
1 axis / (per 1 battery)
Approx. 10000 hours
5 years
Approx. 80 hours
17g
MDS-BTCASE
Battery
connector