6.3
Checking the Servo Amplifiers
Check with the display LED
The operation status can be checked with the servo status display LED of the servo amplifier.
For details on the LEDs of the servo amplifier, refer to the following.
Page 12 Switch Setting and Display
For details on the display of MR-J5-G servo amplifiers, refer to the following.
Page 60 Display
Check with MR Configurator2
Go to the menu bar of MR Configurator2. Select [Diagnosis] [Alarm Display]. If an error has occurred on the servo system,
the details of the alarm or the warning can be checked with the following window.
For details on alarm numbers of the MR-JET-G, refer to the following.
MR-JET User's Manual (Troubleshooting)
For details on alarm numbers of the MR-J5-G, refer to the following.
Page 60 Alarm numbers
6 TROUBLESHOOTING
57
6.3 Checking the Servo Amplifiers
Servo status display LED (SRV)
Network status display LED (N/W)