Mitsubishi Electric MELDAS MDS-B-SVJ2 Series Specifications And Instruction Manual page 286

Printing Specification
date manual No.
Aug., 1998 BNP-B3937C
(continued)
Jan., 1999 BNP-B3937D
Section 6-3 Newly added relay terminal explanation.
Section 6-4-1, 2 Added EN standards compliance to cables and connector
options, added IP67 specification compliant parts.
Section 6-4-3 Newly added flexible conduit explanation.
Section 6-4-4 Reviewed cable wire explanation. Revised cable connection
diagrams and manufacturing diagrams error and reviewed.
Chapter 7 Moved peripheral devices from Chapter 6, and reviewed
peripheral device setting methods.
Section 8-3-1 Added alarm 55. Deleted alarm 54. Added explanation of
detection when the axis is removed.
Section 8-3-2 Added warning EA.
Section 8-3-3 Changed alarm 2C and 52 to deceleration control stop. Change
alarm 5F detection timing.
Section 9-2-1 Added new motor.
Section 9-3-2 Added new motor.
Section 9-4 Overall change of explanation for dynamic brake characteristics.
Section 10-1-1 Added servo amplifier specification items.
Section 10-2-1 Added new motor.
Revised HA83N, HA40N, HC-SF52, 102, HA-FF23, 33 and 63
specification data.
Section 10-2-2 Added new motor.
Section 10-2-3 Added new motor.
Section 11-1-1 Added new motor.
Section 11-1-2 Newly added.
Section 11-2-1 Newly added.
Section 11-2-2 Added new motor.
Section 11-3 Added new motor.
Section 11-3-1 Newly added.
Section 11-4-1 Added new motor. Changed regenerative energy calculation
expression description.
Section 11-4-2 Changed unbalance axis regeneration capacity calculation
expression.
Section 11-5 Newly added servo system selection example.
Section 11-6 Revised linear operation calculation expression errors.
Section 11-7 Revised prism calculation expression errors.
Chapter 12 Moved from old Chapter 7.
Added HC-SF53, HC-SF103, HC-SF153, HC-SF203 and HC-SF353 motors.
Section 1-1-2 Added new motors.
Ch. 2 Preface Added cautions.
Section 2-1 Revised and added explanations.
Section 2-2-1 Revised amplifier and terminal block drawings.
Section 2-2-2 Changed protective grounding name.
Section 2-3 Revised drawing.
Section 2-4 Revised drawings. Added new motors. Changed HA23N to 83N,
40N to 100N power connector type.
Section 2-7 Partially changed explanation.
Section 2-7-3 Changed SG symbol in drawing. Added points.
Section 2-8-4 Changed SG symbol in drawing. Added points.
Section 2-9-3 Changed SG symbol in drawing.
Section 3-2-1 Deleted IP65 and above conditions.
Section 3-2-3 Revised errors.
Section 3-2-4 Revised explanations, corrected mistakes and added new
motor. Added cautions.
Section 3-2-5 Revised explanations
Revision details