Mitsubishi Electric MELDAS MDS-B-SVJ2 Series Specifications And Instruction Manual page 160

< Installing the cell battery >
The internal circuit of the servo drive unit can be damaged by static electricity.
Always observe the following points.
CAUTION
Mount the battery into the servo drive unit with the following procedure.
① Open the operation section window. (For the MDS-B-SVJ2-10/-20, also remove the front cover.)
② Mount the battery into the battery holder.
③ Insert the battery connector into CON1 until a click is heard.
Battery (MR-BAT)
Battery A6BAT (MR-BAT)
For MDS-B-SVJ2-01 to MDS-B-SVJ2-07
< Outline dimension drawings >
φ16.5±0.5
Chapter 6 Dedicated Options
① Always ground the body and work table.
② Never touch the conductive parts such as the connector pins or electrical
parts by hand.
CON1
Battery holder
Battery holder
Battery (MR-BAT)
Battery A6BAT (MR-BAT)
For MDS-B-SVJ2-10, MDS-B-SVJ2-20
Battery connector
HNC2-2.5S-2
HNC-2.5-C-B02
34.5±1
6-8
CON1