Cabling And Setup; Installation Overview - Extron electronics FOX T Plus MM User Manual

Cabling and Setup

Host
Computer
USB
Transmitter
Tx
POWER
12V
1.0A MAX
HOST
OPTICAL
-
Ground -
+12 VDC
Figure 8.

Installation Overview

ATTENTION:
For proper operation, the transmitter, receiver, USB host, and peripherals must be
connected properly as shown in figure 8 and in the sequence described below.
1.
2.
3.
SM or MM Fiber Cable
Rx
External
Power Supply
(12 VDC, 1 A )
FOX T/R USB Extender Plus Connection Guide with Two External
Supplies
Installation and service must be performed by authorized personnel only.
•
L'installation et l'entretien doivent être effectués par le personnel autorisé
•
uniquement.
(Optional) Mount the transmitter to a rack or furniture, following the directions provided
with the mounting kit (see Mounting
Power off the transmitter and receiver, and ensure all peripheral USB devices are
disconnected.
Connect the fiber optic cable appropriate for your extender model (singlemode or
multimode) between the LC SFP port of the transmitter and that of the receiver (see
Connecting the Fiber Optic Cable
FOX T/R USB Extender Plus • Installation and Operation
Receiver
Tx
POWER
12V
1.0A MAX
OPTICAL
- Ground
-
+12 VDC
on page 20).
on the next page).
Keyboard
USB
Rx
1 3
2 4
Four female USB 3.0 compatible type A
connectors provide +5 VDC at up to
500 mA to connected USB peripherals.
External
Power Supply
(12 VDC, 1 A )
12