Table of Contents
Advertisement
Audio Output Overview
By default, the XTP T HD 4K prioritizes embedded digital audio over analog audio to send
over the XTP communication. Use SIS commands (see
page 20) or the XTP System Configuration Software (see
page 28) to manually select the audio input.
NOTES:
The following table shows the audio formats available on the different audio output
connectors on the receiver.
Audio Input Format
2-channel LPCM up to 48 kHz
Multi-channel PCM up to 7.1, 192 kHz
Dolby
Dolby Digital EX
Dolby Digital Plus
Dolby TrueHD
Dolby Atmos™
DTS
DTS-ES Matrix 6.1
DTS-ES Discrete 6.1
DTS-HD
DTS-HD Master Audio™
•
To pass analog audio without video to a display connected to the HDMI output
connector on a connected receiver, the transmitter sends a black signal to simulate
one of the following video signals:
•
720p @ 50 Hz
•
720p @ 60 Hz (default)
•
1080p @ 60 Hz
•
To set the black signal, see the
page 22 or
Transmitter device settings
Audio Format Availability on Receiver Audio Outputs
Digital
up to 5.1
®
®
Digital Surround up to 5.1
®
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation
SIS Configuration and Control
Configuration Software
Black video signal
SIS commands on
on page 35.
Audio Output
HDMI
S/PDIF
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
on
on
Analog
Yes
18
Advertisement
Table of Contents
