Power Cord; Flat Surround - Hearth and Home Technologies Expedition-I Manual

E. Power Cord
The power cord is shipped assembled to the appliance.
You may route the power cord either to the left or right
side depending on your configuration for power source
(Figure 20.1).
Figure 20.1
F. Flat Surround
Overall Dimensions
Standard Size
43" x 31"
Large Size 51" x 34"
1. Lay surround face down on a protected surface to
prevent scratching.
2. Remove door from front of appliance and set aside laying
it onto a protective surface (Figure 20.2).
3. Remove face from front of appliance and set aside laying
it onto a protective surface (Figure 20.2).
4. Lift surround to front of appliance (Figure 20.3).
5. Reinstall face to front of appliance and then the door.
20
Figure 20.2
Part Number
SP1-4331
SP1-5134
Figure 20.3
7094-802A 04/21