Table of Contents
Advertisement
Calibration Certificate ID
072731-239-041621-ACC-USI
Mettler Toledo
Service Business Unit Industrial
1900 Polaris Parkway
Columbus, OH 43240
1-800-523-5123
Customer
Company:
Address:
City:
Zip / Postal:
State / Province:
Weighing Device
Manufacturer:
Model:
Serial No.:
Building:
Floor:
Room:
Range
1
Procedure
Calibration Guideline:
METTLER TOLEDO Work Instruction:
This calibration certificate including procedures and uncertainty estimation also complies with EURAMET cg-18 v 4.0.
This calibration certificate contains measurements for As Found and As Left calibrations.
The sensitivity/span of the weighing instrument was adjusted before As Left calibration with an external weight.
As Found
As Left
This certificate is issued in accordance with the conditions of accreditation granted by A2LA, which is based on ISO/IEC 17025. A2LA
has assessed the measurement capability of the laboratory and its traceability to recognized national standards.
As Found Calibration Date:
As Left Calibration Date:
Issue Date:
Requested Next Calibration Date:
Software Version: 1.23.0.77
Report Version: 2.13.4
Accuracy Calibration Certificate
PFS-TECO
11785 SE Hwy 212; Ste 305
Clackamas
97015-9050
Oregon
Mettler Toledo
PFD774-US11
C112381341
N/A
N/A
N/A
Max. Capacity
1000 lb
Temperature
Start: 20.0 °C
End: 20.0 °C
Start: 20.0 °C
End: 20.0 °C
16-Apr-2021
16-Apr-2021
16-Apr-2021
30-Apr-2022
This is an original document and may not be partially reproduced without the
written permission of the issuing calibration laboratory.
Contact:
Instrument Type:
Asset Number:
Terminal Model:
Terminal Serial No.:
Terminal Asset No.:
Readability (d)
0.02 lb
ASTM E898 - 20
30260953
Humidity
Start: 44.0 %
End: 44.0 %
Start: 44.0 %
End: 28.0 %
Authorized A2LA Signatory:
© METTLER TOLEDO
Accredited by the American Association
for Laboratory Accreditation (A2LA)
CALIBRATION CERT #1902.01
ISO 17025 Registered
ANSI/NCSL Z540-1 Accredited
John Steinert
Weighing Instrument
1
IND570
C101887027
N/A
Environmental conditions have been
verified to ensure the accuracy of the
calibration.
Gary Sargent
Page 1 of 5
Advertisement
Chapters
Table of Contents
