Affidavit - Hearth and Home Technologies Expedition-I Manual

Project # 21-661 Model: Expedition-I

Affidavit

PFS-TECO was contracted by Hearth & Home Technologies to provide testing services
for the Expedition-I Wood-Fired Room Heater per ASTM E2780, Standard Test Method
for Determining Particulate Matter Emissions from Wood Heaters. All testing and
associated procedures were conducted at PFS-TECO's Hearth Products laboratory
beginning on 5/13/2021 and ending on 5/13/2021. The laboratory is located at 11785 SE
Hwy 212, Clackamas OR 97015. Testing procedures followed ASTM E2780. Particulate
sampling was performed per ASTM E2515, Standard Test Method for Determination of
Particulate Matter Emissions Collected by a Dilution Tunnel.
PFS-TECO is accredited by the U.S. Environmental Protection Agency for the certification
and auditing of wood heaters pursuant to subpart AAA of 40 CFR Part 60, New Source
Performance Standards for Residential Wood Heaters and subpart QQQQ of 40 CFR Part
60, Standards of Performance for New Hydronic Heaters and Forced Air Furnaces,
Methods 28R, 28WHH, 28 WHH-PTS, and all methods listed in Sections 60.534 and
60.5476. PFS-TECO holds EPA Accreditation Certificate Numbers 4 and 4M (mobile).
PFS-TECO is accredited by IAS to ISO 17020:2012 "Criteria for Bodies Performing
Inspections", and ISO 17025:2005 "Requirements for Testing Laboratories." PFS-TECO
is also accredited by Standards Council of Canada to ISO 17065:2012 "Requirements for
Bodies Operating Product Certification Systems."
The following people were associated with the testing, analysis and report writing
associated with this project.
Sebastian Button, Laboratory Supervisor
Page | 3