Table of Contents
Advertisement
Digital Cylinder AX (Z5)
(Manual)
2. Attach the special tool.
3. Align the special tool so that the logo is parallel to the recess.
4. Hold the special tool and thumb turn cap firmly at the same time and
turn them together 1-2° clockwise first and then counter-clockwise.
NOTE
Slipping when turning
The surface of the thumb turn cap can be slippery and the cap can be diffi-
cult to turn (especially with WP versions, recognizable by the blue cylinder
neck ring or the lasered marking on the inner side of the cylinder profile).
Wear non-slip gloves.
10. Customise Cylinder AX
52 / 158
Advertisement
Table of Contents
Need help?
Do you have a question about the Digital Cylinder AX and is the answer not in the manual?
Questions and answers