Freely-Rotating Cylinder (Fd; Reader On Both Sides) - SimonsVoss Digital Cylinder AX Manual

Digital Cylinder AX (Z5)
9.1.1.2 Fitting with clip-on covers

9.1.2 Freely-rotating cylinder (FD; reader on both sides)

9.1.2.1 Standard mounting
(Manual)
4. Fit the mechanical thumb-turn (see
[ 37] ).
}
5. Carry out a functional test (see
Digital Cylinder AX is fitted.
9
This option allows you to combine the Digital Cylinder AX with specific
panels. Some cover plates are mounted on the cylinder and so are located
between the thumb-turn and the door. If you want to use such panels, you
have to dismantle both thumb-turns.
Special tool available.
ü
1.5 mm hexagonal wrench available.
ü
1. Dismantle the mechanical knob (see
(mech.) [ 38]
).
}
2. Dismantle the electronic thumb-turn (see
(electr.) [ 43]
).
}
3. Insert the AX locking cylinder (see
4. Secure the AX locking cylinder with the face plate screw (see
locking cylinder [ 50]
}
5. Fit the cover plates if required.
6. Fit the electronic knob (see
7. Fit the mechanical thumb-turn (see
[ 37]
).
}
8. Carry out a functional test (see
Digital Cylinder AX is fitted with clip-on covers.
9
Special tool available.
ü
1.5 mm hexagonal wrench available.
ü
1. Dismantle the electronic thumb-turn (see
(electr.) [ 43]
).
}
2. Insert the AX locking cylinder (see
3. Secure the AX locking cylinder with the face plate screw (see
locking cylinder [ 50]
}
4. Fit the electronic knob (see
5. Carry out a functional test (see
9 Digital Cylinder AX is fitted.
Mounting thumb-turn (mech.)
Functional test [
Unmounting the thumb-turn
Unmounting the thumb-turn
Insert locking cylinder [
).
Mounting thumb-turn (electr.) [
Mounting thumb-turn (mech.)
Functional test [
Unmounting the thumb-turn
Insert locking cylinder [
).
Mounting thumb-turn (electr.) [
Functional test [
9. Installation
34 / 158
47]
).
}
49] ).
}
Fixing the
40]
).
}
47] ).
}
49]
).
}
Fixing the
40] ).
}
47]
).
}