SimonsVoss Digital Cylinder AX Manual page 32

Digital Cylinder AX (Z5) (Manual)
NOTE
Duration of initial programming
A large amount of data is transferred during initial programming. The data
transfer speed is significantly higher with a SmartStick AX or a SmartCD.MP
(and the programming time is therefore shorter).
If possible, use a SmartStick AX or a SmartCD.MP for initial

programming.
12. Open the context menu by right-clicking on the AX locking cylinder entry
in the matrix.
13. Select the Programming
14. Open the ▼ Type drop-down menu .
15. Select the entry "Card reader (SmartCD MP)" or "SmartCD".
16. Click on the Programming button.
NOTE
Programming with SmartStick AX
The SmartStick AX BLE interface has a wide range and can reach several
locking devices at the same time. This is why the SmartStick AX first needs
to know which locking device to programme.
Tap the locking device to be programmed immediately after starting

programming with the SmartStick AX.
9 Programming launches.
17. Wait for programming to complete.
AX locking cylinder is programmed.
9
item.
8. Programming
32 / 158