Half Cylinder (Hz, Reader On One Side) - SimonsVoss Digital Cylinder AX Manual

Digital Cylinder AX (Z5)
9.1.2.2 Fitting with clip-on covers

9.1.3 Half cylinder (HZ, reader on one side)

9.1.3.1 Standard mounting
9.1.3.2 Fitting with clip-on covers
(Manual)
Special tool available.
ü
ü 1.5 mm hexagonal wrench available.
1. Dismantle the electronic thumb-turn (see
(electr.) [ 43] ).
}
2. Also disassemble the other electronic knob.
3. Insert the AX locking cylinder (see
4. Secure the AX locking cylinder with the face plate screw (see
locking cylinder [ 50]
}
5. If necessary, attach the covers.
6. Fit the electronic knob (see
7. Also fit the other electronic knob.
8. Carry out a functional test (see
Digital Cylinder AX is fitted with clip-on covers.
9
Special tool available.
ü
1.5 mm hexagonal wrench available.
ü
1. Dismantle the electronic thumb-turn (see
(electr.) [ 43]
).
}
2. Insert the AX locking cylinder (see
3. Secure the AX locking cylinder with the face plate screw (see
locking cylinder [ 50]
}
4. Fit the electronic knob (see
5. Carry out a functional test (see
9 Half cylinder AX is fitted.
Special tool available.
ü
1.5 mm hexagonal wrench available.
ü
1. Dismantle the electronic thumb-turn (see
(electr.) [ 43]
).
}
2. Insert the AX locking cylinder (see
3. Secure the AX locking cylinder with the face plate screw (see
locking cylinder [ 50]
}
4. Fit the electronic knob (see
5. Carry out a functional test (see
Half cylinder AX is mounted with clip-on covers.
9
Unmounting the thumb-turn
Insert locking cylinder [
).
Mounting thumb-turn (electr.) [
Functional test [
Unmounting the thumb-turn
Insert locking cylinder [
).
Mounting thumb-turn (electr.) [
Functional test [
Unmounting the thumb-turn
Insert locking cylinder [
).
Mounting thumb-turn (electr.) [
Functional test [
9. Installation
35 / 158
49]
).
}
Fixing the
40] ).
}
47] ).
}
49]
).
}
Fixing the
40] ).
}
47]
).
}
49]
).
}
Fixing the
40] ).
}
47]
).
}