Observation Procedures; Turning On The Led Illumination; Selection Between The Eyepiece Light Path And The Camera Light Path - Olympus CX33 Instructions Manual

4

Observation procedures

1

Turning ON the LED illumination

a
2

Selection between the eyepiece light path and the camera light path

a
Set the main switch a to (ON).
1
Rotating the brightness adjustment knob b in the arrow direction
2
increases the brightness and rotating it in the opposite direction
b
decreases the brightness.
You can select the light path for observing the image with eyepieces or the
light path for observing the image on monitors, etc. via camera.
Rotate the light path selection knob a of the trinocular tube to
1
select the light path. (Light intensity ratio: 100:0)
: Eyepiece
: Camera
Be sure to rotate the light path selection knob completely
NOTE
until it stops to acquire the proper observation image.
CX33
9