Seco SBC ADLER User Manual page 59

SATA Test Mode
SATA Speed
Port 0
Port 1
4.4.3.5
SCC Configuration submenu
Menu Item
SCC SD Card Support
SCC eMMC Support
4.4.3.6
USB Configuration submenu
Menu Item
xHCI Pre-Boot Driver
xHCI Mode
USB Port Disable Override
USB Port #0
USB Port #1
USB Port #2
USB Port #3
USB Port #4
USB Port #5
USB 3 Port #0
USB 3 Port #1
USB 3 Port #2
XDCI Support
XDCI Disable Compliance Mode
ADLER
ADLER User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2022 SECO S.p.A.
Enabled / Disabled Enable / Disable SATA Test Modes
Gen1
Gen2 Select SATA Speed
Gen3
Enabled / Disabled Enable / Disable SATA Port #x
Options Description
Enabled / Disabled Enable / Disable SCC SD Card Support
Enabled / Disabled Enable / Disable SCC eMMC Card Support
Options Description
Enable / Disable Enable / Disable the support for XHCI Pre-boot driver.
Once Disabled, the xHCI Controller function will be disabled, none of the USB devices will be detectable
Enable / Disable
and usable during the boot and in the OS. Do not disable xHCI unless is for debug purposes.
Allows enabling or disabling selectively each single USB port from reporting a device connection to the
Enable / Disable
controller.
Only available when "USB Port Disable Override" is Enabled.
Enable / Disable
Allows enabling or disabling the single USB Port #x. Once disabled, any USB device connected to the
corresponding port will not be detected by the BIOS neither by the OS
Enable / Disable XDCI (USB dual role functionality)
Disable / PCI Mode
Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance Mode. Set
FALSE / TRUE
TRUE to disable Compliance Mode
59