Seco SBC ADLER User Manual page 53

Event time-out 0 .. 60
Reset time-out 1 .. 60
4.3.17.4
GPIO Configurations submenu
Menu Item Options
GPO0
GPO1
GPO2 Input
GPO3 Output Low
GPO4 Output High
GPO5 Output Last
GPO6
GPO7
4.3.18 M.2 peripheral management submenu
Menu Item Options
WiFi on M.2 Disabled / Enabled
Bluetooth on M.2 Disabled / Enabled
WWAN on M.2 Disabled / Enabled
ADLER
ADLER User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2022 SECO S.p.A.
Time-out minutes that can pass without refresh before triggering the Event Action. A refresh will restart the
time-out.
Time-out minutes that can pass without refresh before triggering the Reset Action, this timer will start
counting when event time-out is expired.
Description
Configure pin as input or output with a fixed starting value. Last means no changes with respect to the last
boot.
Description
Enable Wifi capabilities from a WiFi M.2 Key E Card
Enable Bluetooth capabilities from a BT M.2 Key E Card
Enable WWAN capabilities from a WWAN M.2 Key B Card
53