Seco SBC ADLER User Manual page 44

4.3.3 S5 RTC Wake Settings submenu
Menu Item Options
Disabled
Wake system from S5 By Every Day
By Day of Month
Wake up hour 0..23
Wake up minute 0..59
Wake up second 0..59
Day of Month 1..31
4.3.4 CPU Configuration submenu
Menu Item Options
Detailed CPU Information
CPU Power Management See Submenu
Active Processor Cores Disabled / Enabled
Core 0
Core 1
Disabled / Enabled
Core 2
Core 3
Intel Virtualization Technology Disabled / Enabled
VT-d Disabled / Enabled
Bi-directional PROCHOT Disabled / Enabled
Thermal Monitor Disabled / Enabled
Monitor Mwait Disabled / Enabled / Auto
P-STATE Coordination HW_ALL / SW_ALL / SW_ANY
DTS Disabled / Enabled
ADLER
ADLER User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2022 SECO S.p.A.
Description
Enables or disables System Wake on Alarm event.
The following menu items will appear only when this voice is not set to Disabled
Sets the wake up hour in 0..23 format (i.e.,3 means 3am, 15 means 3pm)
Sets the wake up minute
Sets the wake up second
This item is available only when "Wake system from S5" is set to "By Day of Month". Sets the day of month for
Wake on Alarm event. Valid range s from 1 to 31, error checking will be done against month/day/year
combinations that are not valid.
Description
Shows board's specific SoC information
CPU Power Management options
Number of Cores to enable in each processor package
Core #x Enable / Disable. Only available when "Active Processor Cores" is enabled
When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology
Enables or disables CPU VT-d
When a processor thermal sensor trips (either core), the PROCHOT# will be driven. If bi-direction is enabled,
external agents can drive PROCHOT# to throttle the processor
Enables or disables the Thermal Monitor
Enables or disables Monitor Mwait
Change P-STATE Coordination type
Enables or disables the Digital Thermal Sensor
44