Electrostatic Discharges; Rohs Compliance - Seco SBC ADLER User Manual

Single board computer with intel atom x series, intel celeron j / n series, intel pentium n series (formerly apollo lake) processors on picoitx form factor

Hide thumbs

Table of Contents

1.4 Safety

The ADLER board uses only extremely-low voltages.

While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.

Always switch the power off, and unplug the power supply unit, before handling the board and/or connecting cables or other boards.

Avoid using metallic components - like paper clips, screws and similar - near the board when connected to a power supply, to avoid

short circuits due to unwanted contacts with other board components.

If the board has become wet, never connect it to any external power supply unit or battery.

Check carefully that all cables are correctly connected and that they are not damaged.

1.5 Electrostatic discharges

The ADLER board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all the

devices and/or components on-board.

Whenever handling a ADLER board, ground yourself through an anti-static wrist strap. Placement of the board on an anti-static surface

is also highly recommended.