Seco SBC ADLER User Manual page 45

4.3.4.1
CPU Power Management submenu
Menu Item Options
EIST Disabled / Enabled
Turbo mode Disabled / Enabled
Max performance
Boot Performance mode
Max battery
Power Limit 1 Enable Disabled / Enabled
Power Limit 1 Clamp Mode Disabled / Enabled
Power Limit 1 Power Auto / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10
Auto / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /
10 / 12 / 14 / 16 / 20 / 24 / 28 /
Power Limit 1 Time Windows
32 / 40 / 48 / 56 / 64 / 80 / 96 /
112 / 128
4.3.5 AMI graphic Output Protocol Policy submenu
Menu Item Options
List of available / connected
Output Select
module
4.3.6 PCI Subsystems Settings
Menu Item Options
Above 4G Decoding Disabled / Enabled
BME DMA Mitigation Disabled / Enabled
Hot-Plug support Disabled / Enabled
ADLER
ADLER User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2022 SECO S.p.A.
Description
Enables or disables Intel
Only Available when "EIST" is enabled. Enables or disables the Turbo Mode
Select the performance state that the BIOS will set before OS handoff.
Enables or disables Power Limit 1. When Enabled, the following menu items will appear
When Power Limit 1 is Enabled. Enables or disables the Clamp Mode
Power Limit 1 in Watts. Auto will program Power Limit 1 based on silicon default support value.
Power Limit 1 Time Window Value in Seconds. Auto will program the Power Limit 1 Time Window based on
silicon default support value
Description
User select monitor for graphic console output in the pre-OS phase
'
s video interfaces
Description
Globally Enables or Disables 64bit capable Devices to be Decoded in Above 4G Address Space (Only if
System Supports 64 bit PCI Decoding)
Re-enable Bus Master Attribute, disabled during Pci enumeration for PCI Bridges after SMM Loocked
Globally Enables or Disables Hot-Plug support for the entire System. If System has Hot-Plug capable Slots
and this option set to Enabled, it provides a Setup screen for selecting PCI resource padding for Hot-Plug
® SpeedStep
45